5
On the other side of the controller the hand pad, the serial cable and the 12V DC can be connected as
shown in the picture:
The 12V cable needs to be connected with the dotted line to the + and the other to the
–
12V DC.
Voltage needs to be within 12 and 18 V DC. 2 Amp is more than enough for moving both motors at
the same time with the highest speed. A good size battery would for example be the battery of a
motorcycle.
The serial cable can be connected to the USB to serial converter. When you plug it in your computer
the drivers will automatically be installed from the windows control system.
