MESTIC MPPT MSC-3010 Instructions For Use Manual Download Page 15

Model

MPPT MSC-3010

MPPT MSC-3020

Rated charge current

10A

20A

System rated voltage

12V/24V

Voltage range of battery

8-32V

Max. open voltage of PV module

75V

Battery type

Sealed, flooded, gel, LiFePO4

Equalized charging voltage

Maintenance free lead acid battery: 14,6V; gel: no; lead acid flooded battery: 14,8V

Absorption charging voltage

Maintenance free lead acid battery: 14,4V; gel: 14,2V; lead acid flooded battery: 14,6V

Floating charging voltage

Maintenance free lead acid battery; gel; lead acid flooded battery: 13,8V

Low Voltage Reconnection (LVR)

Maintenance free lead acid battery; gel; lead acid flooded battery: 12,6V

Low Voltage Disconnection (LVD)

Maintenance free lead acid battery; gel; lead acid flooded battery: 10,8V

Static loss

≤ 9,2mA 12V; ≤ 11,7mA 24V; ≤ 13,2mA 48V

High Voltage Disconnection (HVD)

16V (24V x 2; 48V x 4)

Duration of absorption charging

2 hours

Duration of equalized charging

2 hours

Light control voltage

5V

Temperature compensation coeficient

-4mV/°C (25°C)

Charge loop voltage drop

≤ 0,29V

Discharge loop voltage drop

≤ 0,16V

LCD Temperature

-20°C to +70°C

Storage Temperature

-30°C to +80°C

Operating Temperature

-20°C to +55°C (runing at full rated current continuously)

Working humidity

≤ 95% No condensation

Protection rate

IP30

Grounded type

Positive grounded

Dimensions

17,5 x 14 x 4,1 cm

Packaging dimensions

19,8 x 14,8 x 5 cm

Gross weight

20,5 kg

Net weight

19,6 kg

Technical specifications

ENGLISH

Summary of Contents for MPPT MSC-3010


















Reviews: