Description of button function
1.
Load switch: when the load is in manual mode, briefly press the SET button to swich the load.
2.
Breakdown: briefly press the SET button.
3.
Browse mode: briefly press the MENU or SET button.
4.
Setting mode: hold the MENU button down longer to enter the second browsing interface and then press the
MENU or SET button to go through the interfaces. Hold the MENU button down longer again to enter the
setting mode. Briefly press the MENU or SET button to set the parameters. Then hold down the MENU button
to save the new settings. By pressing the SET button (long) or by not operating any buttons for 20 secons, the
second interface will be exited.
Display
1.
Night-time symbol:
This symbol will appear, when the input
voltage of the solar panel is less than the
sensor identification point voltage.
2.
Daytime symbol:
This symbol will appear, when the input
voltage of the solar panel is more than the
sensor identification point voltage.
3.
Indicator of the solar system parameter:
This symbol will appear, when the parameter
of the solar panel is displayed. For example
the voltage of the solar panel.
4.
Indicator of the battery parameter:
This symbol will appear, when the parameter of the battery is displayed. For example the voltage or
temperature of the battery.
5.
Indicator of the load parameter:
This symbol will appear, when the parameter of the load is displayed.
6.
System voltage:
When a different system voltage is displayed, the controller will adjust the technical data automatically.
7.
Numerical display area
8.
Timer setting function
9.
Switch symbol
10. Unit symbol
11. Warning:
This symbol will appear, when there is an error.
12. Indicator of the load status:
on/off
13. Indicator of the output power:
This symbol will appear, when the load terminal has output.
14. Indicator of the capacity of the battery:
This symbol will show the different levels of battery capacity, with the number of bars within the symbol.
15. Indicator of the charge status:
This symbol will appear, when the controller is charging. A flashing symbol indicates float charge.
ENGLISH
