Intercom
Operating Instructions
6.3 Cleaning
•
Cleaning of the housings only with solvent free cleaning supplies and a soft cloth.
•
Do not use aggressive cleaning supplies like alcohol, acetone or abrasive materials.
6.4 Installation Instructions
!
Risk of Fire or Damage
Do not open the devices. Opening the devices is only allowed with the necessary guidance and
previous authorization from mk messtechnik GmbH. Non-observance can lead to fire or
damage of the device. Warranty will be void!
§
Possible Risk of Injury and Damage When not Observing this Manual.
The devices described in this manual are very complex. This manual must be read and
respected compellingly before installation and initial operation. Safety instructions must be
respected compellingly.
Disregard can lead to considerable damage of the devices and serious risk of injury for the
user.
•
Use the devices only on skid-proof surfaces, respect the specific installation references for each device.
•
Electrical connections are only allowed to be done by authorized EMC trained specialist staff.
•
Consider electrical parameters and correct pinout assignment.
•
Incorrect electrical connections can damage the components of the devices.
•
Expert only installation of the connections, provide strain reliefs if necessary.
•
Do not mechanically work on devices and cases!
•
Do not modify or short circuit plugs and do not shorten or extend included cables without the approval by the
manufacturer!
7 Installation and Initial Operation
7.1 Mechanical Assembly
Connect both devices with duplex optical fibres via optical I/O connectors (In → Out).
7.2 Electrical Assembly
The console device is powered by a wall power supply and the mobile device is powered by a battery pack.
Connect the wall power supply with the console device and plug the other end into a grounded socket.
Page 7 / 23
Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 4089165750, www.reliantemc.com
