Intercom
Operating Instructions
Power
Permanently on when device is powered up,
permanently off when device is switched off,
blinking when talking is possible
Red LED
Info
Permanently off when connection to other station
is ok, blinking when there is no optical connection
to other station, blinking once when resetting to
default
Yellow LED
Mic
Capture audio signals
3-pole-socket XLR connector
PTT (Push to talk)
Push and release (< 250ms) to activate/deactivate
permanent talking, push and hold (> 250ms) to talk
temporary, release to stop talking temporary
Push button
Line In /Mic
(optional)
Switch to “Line In” to activate transmission of line
in signal, switch to “Mic” to activate transmission
of mic signal
Switch button
Volume In
Turn right to increase microphone gain, turn to left
to decrease microphone gain, push and hold (> 2s)
to reset settings to default
Turning knob/ Push button
(Software control)
Volume Out
Turn to right to increase speaker volume, turn to
left to decrease speaker volume
Turning knob
(Hardware control)
7.7 Back Side of the Console Device
Page 11 / 23
DC-In
6..12V
0,5A
dAV-TRX
Ch 1 Optical
In Out
On
Off
Line-Out
Line-In
Figure 7-4: back side of console device with line in/out
Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 4089165750, www.reliantemc.com