Operating Instructions MBI 46.51.39
Version 0.9
en MBI 46.51.39 operating instructions.docx
Issue: 08/2022
page 4 from 29
2
Safety
2.1 Intended use
Use the
MBI 46.51.39 carrier frequency amplifier
exclusively for the operation of differential
transformers (LVDT) and inductive half-bridge displacement transducers (LVIT). The amplifier
may only be operated with passive transducers without built-in electronics. Any further use
shall be deemed not to be in accordance with its intended purpose.
In order to ensure proper and safe operation, the device must only be operated in accordance
with this instruction. Make sure to follow any applicable legal / safety regulation for the
respective use of application. This also applies to the use of accessories.
2.2 Site Conditions
Be sure that the site conditions for the intended installation are within the technical
specifications of the device e.g., in terms of temperature and IP protection etc.
Do not use the device near other machinery or devices such like large electrical machines,
high voltage cables and facilities that generate strong electric or magnetic fields.
2.3 General hazards
The device complies with the latest state-of-the-art technology and regulations and is safe
when used as intended. Residual hazards may emanate from the device if it is improperly used
and operated e.g., by insufficiently qualified personnel.
2.4 Qualified personnel
Both the commissioning and operation of the device may only be carried out by trained
professionals who are aware of the dangers at hand. Professionals must be familiar with
national health and safety regulations, accident prevention regulations and general industrial
standards for installation of electronic equipment.
2.5 Transport damages
Before unpacking, check the packaging of the device for any damages. If the packaging has
been damaged during transport and if there is a suspicion of damage to the device, it may not
be put into operation. Have MESSOTRON check the device before using it.
