also means the maximum life time for a BPDU frame. Number between
6-40 (default is 20).
Forward Delay:
The maximum time (in seconds) the root device will wait
before changing states (i.e., discarding to learning to forwarding). Number
between 4 – 30 (default is 15)
Click
Update
to have the configuration take effect.
The below table shows the Bridge Status and Root Switch’s Status. The
Bridge Status shows the STP configuration of the switch. The Root Status
shows the Root Switch’s Information of the STP domain.
12.13.3
STP Port Settings
The STP Port Setting page
allows you to change the port
priority and its path cost.
After STP/RSTP is enabled, the
system automatically assigns
the port priority and path cost to
the prot. Normally, it is
necessary to change the
parameters, however, you may
need to control the root switch or
block port in some condition.
This page allows you to change the STP port setting. Select the port number,
type the value of the Priority and Root Path Cost.
39
