6
2.2 LED Indicators
The LED Indicators present real-time information of systematic operation
status. The following table provides description of LED status and their
meaning.
LED
Color/Status
Description
Power
Amber On
Power on
Green On
Link Up
10/100M
Link/ ACT
Green Blinking
Data activating
Amber On
Port is linked to Power Device
PoE
Off
No Power Device is connected
Green On
Link Up
1000M
(Port 9-10)
Green Blinking
Data activating
2.3 Hardware
Installation
Set the switch on a large flat space with a power socket close by. The flat
space should be clean, smooth, level and sturdy. Make sure there is enough
clearance around the switch to allow attachment of cables, power cord and
allow air circulation. The last, use twisted pair cable to connect this switch to
your PC then user could start to operate the switch.
AC Power Input
Connect the attached power cord to the AC power input connector, the
available AC power input is range from 100-264VAC.
Ethernet cable
Request
The wiring cable types are as below.
10 Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
