Figure 3-3
Port No.:
Select the port number you want to configure.
Tx Rate:
Type the Tx Rate value. The value is range from 0-255.
Rx Rate:
Type the Rx Rate value. The value is range from 0-255.
Speed Base:
Low: step by 32Kbps. High: step by 256Kbps for Fast
Ethernet Ports. 2048Kbps for Gigabit Ports.
Click
Update
to have the configuration take effect.
Example: Type 5 for both Tx and Rx Rate and select the High as speed base for
port 1 and port 10. The actual rate for port 1 (Fast Ethernet) is “1280”, for port 9
(Gigabit Port) is 10240. You could see the table is updated as below.
Figure 3-4
12.13.3
Broadcast Storm Control
The switch implements a broadcast storm control mechanism. Tick the check
boxes to have them beginning to drop incoming broadcast packets if the
received broadcast packet counts reach the threshold defined. Each port’s
broadcast storm protection function can be enabled individually by ticking the
21
