NIC990
l
Quick Start Guide 1
Cautions
The camera must be installed on a solid mounting surface.
Please make sure the power source is AC 24V / PoE+. Although the camera can be
powered via a PoE+ connection, the PoE+ power source won’t be able to drive the
camera with its equipped heater being operating simultaneously. Users are supposed
only to supply the camera with AC 24V continuously for the heater inside the camera
to operate.
Keep the camera and other accessories dry.
Before cleaning the unit, please first unplug the power
The power cable must be properly secured as improper connections may cause a
short circuit, fire hazards, or serious damage and hazards.
During prolonged inactivity, please unplug the power cable and the video cable to
avoid damage from lightning strike and power surges
The use of CSA certified/ UL Listed Class 2 power adapters is required to ensure
compliance.
Warnings
Installation and maintenance should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
Please follow the Caution labels on the product and Instruction Manual to ensure
operation safety.
CAUTION
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THE UNIT.
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
THE COVER. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
Copyright
No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the express written permission
of MESSOA.
© 2012 All rights reserved.
Disclaimer
Summary of Contents for NIC990
Page 2: ......
