23
NOTE1:
If you would like to connect camera with IPv6 address, please note that this only works if your
network environment and hardware equipment support IPv6. The browser should be Microsoft®
Internet Explorer 6.5, Mozilla Firefox 3.0 or above.
NOTE2:
(Link with IPv6 address as following steps)
1. Go to Setup -> System -> System Information page (under IPv4) to know the IPv6 address
2. Open your web browser to input the IPv6 address in the address bar
3. The format should be:
http://
[
2014:db8:0:1:2e0:d8ff:fe0c:adef
]
/
4. Press Enter key to open the Live View page of camera
For example:
Network Connectivity
This page provides the connectivity configuration, so that IP camera can be accessed without necessarily
providing the numerical IP address.
Enable UPnP Service:
with UPnP enabled, IP camera device can be easily discovered in Windows Network
(My Network Places). See “Discover devices in Windows Network” in previous section.
Enable DDNS Service:
By registering this sort of service, camera can be assigned and accessed over
Internet with a hostname instead of IP address. To enable the services, visiting the website of the service
provider (
http://www.dyndns.com/
) and registering an account are required.
