MeshLinx MWI-5000 User Guide
MESHLINX CONFIDENTIAL
1
set wif<1|2|3|*> rts [rts_value] [enable | disable]
– Set
RTS; usable values are 256 - 2346.
set wif<1|2|3|*> frag [frag_value] [on | off]
– Set frag;
usable values are 256 – 2346.
set wif<1|2|3|*> txpower [ <tx_power_value>] | [auto] |
[fixed]
| [max54] ]
– Set Tx power in dbm unit; usable values
are 0 – 20. The max54 sets the transmit power to the maximum
level that can achieve a 54Mbps datarate.
•
auto – ATPC is enabled on the wireless interface and
best transmit power is selected automatically
regardless of tx_power_value input.
•
fixed – ATPC is disabled on the wireless interface and
transmit power is selected from the tx_power_value
input.
set wif<1|2|3|*> beacon <beacon_interval>
- Set beacon
interval; usable values are 20 - 1000.
set wif<1|2|3|*> header [short | long | both]
– Set header.
set wif<1|2|3|*> allofdmbasic [enable | disable]
– enable or
disable all OFDM rates as basic rate.
set wif<1|2|3|*> diversity [antenna1 | antenna2 | both]
– Set
antenna diversity per-wif basis.
set wif<1|2|3|*> dpd [enable | disable]
– Enable or disable Digital
Pre-Distortion per wif basis.
set wif<1|2|3|*> radiomeasure [enable | disable]
– Enable or
disable radio measurement feature.
start wif<1|2|3|*>
- starts the selected wif.
stop wif<1|2|3|*>
- stops the selected wif.
4.2.3.12
AP
get ap macaddr
– Get AP MAC address
get ap filter
– Get the MAC address filter settings
set ap filter enable
– Enable MAC address filtering
set ap filter Disable
– Disable MAC address filtering
set ap filter allow
– Set default to allow listed MAC
addresses
set ap filter disallow
– Set default to disallow listed MAC
addresses
set ap filter xx:xx:xx:xx:xx:xx [allow | disallow | clear]
–
Add/delete MAC address lists
allow: Add the MAC address to the allowed list
disallow: Add the MAC address to the disallowed
list
