42
XXXV.
Memory – Special feature ‘Average
of the last 3 measures’
After each measurement, the SYS, DIA and heart pulse
rate will be automatically stored in memory together with
the time and date. Each Memory can keep records up to
the latest 30 measures. If more than 30 measures, the
memory will automatically clear out the earliest data.
a. AVERAGE of the LAST 3 MEASURES
Once you first press the "MEM" key, the average of the
last 3 measurements is displayed; the symbol [A]
(Average) is shown to remind you that this is the average
of the last 3 measures.
d. Then, Press again "START/STOP" key to START the
measurement. All the segment of the screen will appear
and then the air pressure will automatically pump up to
195 mmHg. If your blood pressure tends to be on the
higher level, the air pressure will automatically increase
to the required level for measurement. DO NOT MOVE
OR TALK DURING THE MEASUREMENT.
e. After the air pressure has increased, it will slowly
decrease. When the pulse rate is detected, the HEART
rate symbol will start flashing; the measurement is
processing.
f. At the end of the measure, the SYS, DIA, Heart pulse
rate will be displayed for one minute. You may see the
Irregular heart beat symbol (see related section Irregular
heart beat for more information)
