11
2.0
11
Preferences
Read Default
Select a preferred mode of measurement when the Defender is initially turned on.
Default Settings
Select <No> to allow the ‘Read Default’ change. Selecting <Yes> will reset your Defender
to the factory default settings. (Factory default settings are provided elsewhere in this
manual.)
Data Port
Set the data port interface by selecting:
<BIOS>
to operate with Bios DryCal software.
<SKC>
to operate with SKC CalCheck
®
Interface.
Magnification
Controls the amount of data on the display. Select
<Zoom>
to view only flow measure
-
ments in larger font, or select
<Detail>
to simultaneously view flow measurements,
temperature, and pressure in a smaller font.
Power
Power Save
By selecting
<On>
, your Defender will save power by turning off after five minutes of
inactivity. However, it will not turn off when connected to the AC power adapter/charger.
Select
<Off>
, and your Defender will remain on until you manually turn it off.
Backlight
Select
<On>
to illuminate the LCD display or
<Off >
to conserve battery power.
Summary of Contents for Defender 530
Page 1: ...Defender 530 User Manual...