5
error code display
The oven will identify some of the most common problems by flashing an error message
code in the time display window.
error code display
Fault
Recommended action
Please remember - No servicing or repairs should be carried out other than by an approved Service engineer
Door not fully shut.
Possible electrical fault
Oven has overheated
No time has been set.
Invalid time has been set. e.g. 6secs
The required cooking time for multiple
items exceeds 30minutes
Close door fully.
Call Merrychef Service Dept.
Clean air filter and vents
Leave oven switched on but not cooking
for 4-5 minutes.
PRObLeM SOLVING
Technical Specifications
Height
( mm )
Width
( mm )
Depth
( mm )
500
489
45
Microwave
Power output
( watts )
75
Wt.
( kgs)
4.5
Pt No. 3Z3046GB Issue 5
Manufacturers recommended
clearances
50*
50
50
Power Supply: See rating plate at rear of oven
This equipment complies with the following EEC directives:
EMC 89/336 EEC
LVD 73/3 EEC
Merrychef reserves the right to alter specifications without prior notice.
Display shows 0:00 but the cavity light
and cooling fans do not operate
Control panel lights do not operate with
oven connected to electrical supply.
Oven has gone into ‘stand-by’ mode, press
any pad to restart.
. Check oven is connected to electrical
supply
. Check fuse is correct value and in good
order.
3. Call Merrychef Service Dept.
Microcook HD05 & HDV05
45
05
4.5
40
*
For 2 ovens side by side clearance is 100mm
each side
Remove one item and try again
Set a time
Set time in correct format :0
Microcook HD45 & HDV45
Microcook HD75 & HDV75
Microcook HD05
Microcook HD95 & HD95
500
489
500
650
489
500
4.5
95
05
4.5
