SEALING AND TROUBLE SHOOTING
7
Step 1
3
.
Step 1
4
.
Use a quality silicone sealant and
applicator gun to seal the finished
door.
Seal top to bottom on
the
between
the wall profile and
the
wall. Note: do not apply
sealant on
the inside of the tray
/ floor.
Seal only along bottom on the
between it and the tray
/
floor
and approx 50mm up between
the wall profile and the wall.
Fix the top cover cap
&
V6MLN05
V6LP8076.
Seal
at
vertical
joints
on
bottom
of
frame
on
outside
only
.
SEALING INSIDE
INSIDE
SEALING OUTSIDE
OUTSIDE
24 HRS
TROUBLE SHOOTING GUIDE
1. Is the tray / floor level where the shower wall is located? (
)
2. Is the shower wall sealed correctly to the floor and wall in the correct location (
)
3. Is the wall profile plumb? (
)
4. Top rail will not reach the back wall. Ensure that the back wall is not leaning back. (away
from the tray at the top) The distance from the
be maximum 950mm (
)
see page 3
see step 14
see step 1
see step 1
inside
of
the
wall
profile
to
the
back
wall
should
50mm
13
V6LP8076L/R
V6MLN05
