FITTING DOOR PANEL
4
Step 3.
Identify the top of the panel column, by
ensuring the screw holes line up with the
panel correctly, and secure the support bar
ferrule
V6S6SW05
with 2 screws
V6ST4X40.
Step 4.
Position floor support ferrule
V8123
on bottom of panel
A
and
slide it into the wall profile.
Note
:
Ensure
glass
is
fitted
with
label
showing
from
outside
.
Step 5.
Note: If fitting on a tiled floor ONLY, option to screw
floor. Position panel A into wall profile and mark position on
floor
V8123
remove panel and fix
V8123
to floor using
plugs
V8125
V8123
to
and screws
V4115
.
ANTI-SLIP PADS
V8126
&
V8127
ARE OPTIONAL.
Step 6.
Press the seal gasket
V6H081100
onto the bottom
edge of the glass.
NOTE: This can be sealed to the floor/tray with
silicone if required or omitted and use silicone
only as required.
3
4
5
V8123
V6H081100
V6ST4 40
X
V6S6SW05
6
