6
7
ASSEMBLY
STEP 2
A
Open
hardware bag 2
.
B
Slide the
left console mast
down onto the
console mast
support tube
. Bolt in place
using 2
bolts (b)
, 2
spring
washers (c)
, and 2
flat
washers (d)
on the side. Then,
bolt in place using 2
bolts (b)
, 2
spring washers (c)
, and 2
arc
washers (e)
on the front.
C
Repeat on the other side.
On
right console mast
, the
console cable
must be threaded
through the mast.
BOLT (B)
15 mm
Qty: 8
SPRING WASHER (C)
15 mm
Qty: 8
FLAT WASHER (D)
15 mm
Qty: 4
ARC WASHER (E)
17 mm
Qty: 4
HARDWARE BAG 2
CONTENTS :
RIGHT CONSOLE MAST
CONSOLE MAST
SUPPORT TUBE
BOLT (B)
SPRING WASHER (C)
FLAT WASHER (D)
BOLT (B)
SPRING WASHER (C)
ARC WASHER (E)
CONSOLE CABLE
(THREAD THROUGH
TOP OF CONSOLE MAST)
NOTE: Do not completely tighten any
screws or bolts until
step 4
is complete!
NOTE: Be careful not to pinch any wires
while assembling the masts.
ASSEMBLY
STEP 1
A
Open
hardware bag 1
.
B
Slide the left
frame extension tube
onto
the
console mast support tube
. Bolt
in place using 2
screws (a)
on the side.
C
Repeat on the other side.
SCREW (A)
15 mm
Qty: 4
HARDWARE BAG 1
CONTENTS :
FRAME EXTENSION TUBE
CONSOLE MAST SUPPORT TUBE
SCREWS (A)
735TSM-Eng-MSp-OM-rev1.4.indd 6-7
9/9/09 9:48 AM
