COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Hard Drive Removal
1. Turn off and unplug the game.
2. Unlock and open the front bezel.
3. Slide the CPU shelf out of the game and into its service position.
4. Remove the screw and washer fastening the hard drive mounting plate to the CPU shelf and
carefully pull the hard drive assembly away from the game. See Figure 1.
5. Remove the 4 screws and shoulder washers fastening the hard drive to the mounting plate and
remove the drive. See Figure 1.
6. Remove the grommet surrounding the wires on the 4-pin power connector from the cutout in
the hard drive mounting plate in order to make room to unplug the connector. Then unplug both
the power connector and the ribbon cable from the hard drive. See Figure 1.
Hard Drive Installation
1. Connect the power connector and ribbon cable to the new hard drive.
2. Replace the grommet surrounding the wires on the power connector in the cutout in the hard
drive mounting plate, then fasten the drive to the mounting plate with the 4 screws and shoulder
washers.
3.
Place the hard drive assembly in the game and fasten the mounting plate to the CPU tray with
the screw and washer. See Figure 1.
4. Slide the CPU shelf back into the game.
5. Close and lock the front bezel.
6. Plug in and turn on the game.
Motherboard Removal
1. Turn off and unplug the game.
2. Unlock and open the front bezel.
3. Slide the CPU shelf into its service position.
4. Use the
Motherboard Diagrams
section to determine the board type in your game, then discon-
nect all connections to the board.
5. Remove the screws securing the motherboard assembly to the game and remove the board.
Insert the board into an anti-static bag for storage. NOTE: Be sure to read the Motherboard
Handling Precautions before handling the board.
Motherboard Installation
1. Place the new motherboard in the game and fasten it with the mounting screws/standoffs.
2. Reconnect all connections to the board.
3. Slide the CPU shelf back in the game.
4. Close and lock the rear door.
5. Plug in and turn on the game.
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES
Removal/Installation of Major Assemblies -
MAXX Upright
Troubleshooting Information - Removal/Installation of Major Assemblies -
MAXX Upright
Megatouch MAXX Technical Reference Manual
