BEFORE YOU BEGIN, PLEASE TAKE SOME TIME TO CAREFULLY EXAMINE THE ILLUSTRATIONS OF AS
TYPICAL GARAGE DOOR OPENER INSTALLATION ON BOTH A SECTIONAL AND A ONE-PIECE DOOR.
Some installation instructions vary for sectional and one-piece doors. Follow only those instructions which apply
to your door type.
Do you have a finished ceiling in your garage? If so, you will need a support bracket and additional fastening
hardware. Refer to Step 5, Page 14 for specific requirements.
Do you have a lightweight or metal door (or does it have glass panels)? If so, horizontal and vertical
reinforcement is required. Refer to Step 10, Page 17.
If possible, install the door opener 2.1m or more above floor with the manual release handle mounted
1.8m above the floor.
4
Horiazontal &Vertical
Support - Not Supplied
(Needed Only for
Lightweight Garage
Door Installation)
Cable
Pulley
Bracket
Header Bracket
Trolley
Straight
Door
Arm
Manual
Trolley
Release
Door Bracket
Door
Curved
Door
Arm
Garage
Dooor
Spring
Header
Chain
Horizaontal
Garage Door
Reinforcement
(if needed)
Vertical Garage Door
Reinforcement (if needed)
Support Bracket
and Fastening Hardware
(Not Supplied)
Cable Pulley
Bracket
Header
Bracket
Trolley
Straight
Door
Arm
Manual
Trolley
Release
Door Bracket
Curved
Door
Arm
Header
Door
Chain
Cable
Cable
Support Bracket
and Fastening Hardware
(Not Supplied)
ONE-PIECE DOOR INSTALLATION
SECTIONAL DOOR INSTALLATION