Merik 501M-1/2HP Owner'S Manual Download Page 1

Garage Door Opener

Owner’s Manual

FOR RESIDENTIAL USE ONLY

1/2HP

Model 501M - 1/2HP

CAUTION! PLEASE READ THIS MANUAL CAREFULLY!

The MODEL NUMBER label is located on the front panel of your opener.

CONTENTS

PAGE

Safety Rules ................................................................2
Features of Your Opener .............................................3
Specifications ..............................................................3
You'll Need Tools.........................................................3
Completed Installation Illustration................................4
Operation of Your Opener ...........................................5
Accessories .................................................................5
Care & Maintenance of Your Opener ..........................6
Assembly Instructions..................................................7
Installation Instructions ..............................................10
Travel Limit Adjustments ...........................................20

CONTENTS

PAGE

Force Adjustments ......................................................21

Safety Reverse Test....................................................22

The Protector System™ ..............................................22

Code Programming Instructions..................................23

Having a Problem?......................................................24

Carton Contents & Hardware Illustrated .....................26

Repair Parts, Rail Assembly .......................................26

Repair Parts, Installation .............................................26

Repair Parts, Opener Assembly..................................27

How To Order Repair Parts.........................................28

Warranty......................................................................28

FASTEN THIS MANUAL NEAR THE GARAGE DOOR AFTER INSTALLATION.

PERIODIC CHECKS OF THE OPENER ARE REQUIRED TO INSURE SATISFACTORY OPERATION.

Summary of Contents for 501M-1/2HP

























































Reviews: