Meridian M3900 series, Installation And Administration

Page: 75 / 88

Installation Page 75 of 86
M3900 Series Telephones Description, Installation and Administration
4 Insert the clips on the telephone into the hinges on the footstand, then
press on the front of the footstand until it snaps into place.
5 While depressing the telephone tilt handle, swing the footstand into the
desired position, then release the handle.
6 Carefully turn the new assembly upright.
To install the handset option for the M3905
Call Center Telephone
The Handset Kit is a hardware option for the M3905 Call Center Telephone.
The handset does not accompany the M3905 Call Center Telephone. The
handset can be added to the M3905 by removing the front plate of the
telephone.
Note: Nortel Networks recommends that a systems administrator
complete this installation.
Figure 13
Removal of the Hook Switch Cover
There are five tabs and two hidden snaps on the HookSwitch cover. There are
two tabs along the right and three along the bottom edge (Front view). To
remove the cover, the hidden snaps must be released (Rear view).
553-9047
553-9068
Front view Rear view