Operator’s
Manual
illumipro-10
Operator’s Manual: ENGLISH
Page 7
Copyright© Meridian Bioscience, Inc.
SN11007, REV. 07/2010
Operating Instructions
The
illumipro-10
operates in four basic modes: ASSAY, RESULTS, SERVICE, and SYSTEM. Assay
Selection and Sample amplification occurs in the ASSAY mode; Test Results are managed in the
‘RESULTS mode; and basic instrument set-up is performed in the SYSTEM mode. The SERVICE mode
is reserved for trained service professionals and is not accessible by the Laboratory User. General
information regarding each mode of operation is provided in this section.
Keypad
The functions of the
illumipro-10
are navigated through the keypad. The Keypad provides a simple user
interface and allows for basic menu navigation, input of alphanumeric characters for sample identification,
and Assay RUN initiation. Keypad functions will be referred to throughout this manual; keypad layout and
symbols used are defined below.
NOTE: For keypad buttons with multiple characters,
scroll by pressing the keypad button multiple times.
Keypad Button
Character / Function
1
<SPACE>, 1
2
A, B, C, 2
3
D, E, F, 3
4
G, H, I, 4
5
J, K, L, 5
6
M, N, O, 6
7
P, Q, R, S, 7
8
T, U, V, 8
9
W, X, Y, Z, 9
0
0
-
-
Scroll Up
Scroll Down
Scroll Back, Backspace
Enter
RUN
Run Selected Assay Protocol
