Page
9
of
14
Step 8
(Carriage Assembly)
Place the axle underneath the auger tubes on the stands. Attach the carriage are & hub assembly to the axle
using (4) 1/2" x 1-1/2” hex flange bolts and flange nuts. (See fig. 7.1) Do this same step on the other side of the
axle.
Step 9
Align and place the wheel on to the hub being sure the fill stem is towards the outside. Secure the wheel to the
hub using (5) 1/2" lug nuts. Tighten the lug nuts evenly using a “star” pattern. Repeat this step to assemble the
hub & wheel on the other side.
Fig. 8.1
Fig. 7.1
Fig. 7.2
