Page
11
of
14
push bolt all the way through the housing. Attach other lift arm onto bolt & secure with a 3/4" top lock nut.
The lift arms, housing, & roller should now be assembled together.
Step 12
Next, slide the lift arms and the lift roller onto the track on the underside of the discharge tube. After this is
done bolt on the lift roller stop using (2) 3/8” x 1” hex flange bolts & flange nuts. (If assembling a T832 bolt
the stop onto the track using the top set of holes; T836 bolt stop onto track using the 2
nd
set of holes; T842 bolt
stop onto track using 3
rd
set of holes in track.)
Step 13
Using a lifting strap, lift up the auger in front of the discharge spout until the lift arms align with the top holes in
the axle. When the arms align, fasten them to the axle using (2) 3/4" x 1-1/2” hex bolt & top lock nut. No not
over tighten as the lift arms need to be able to rotate on the axle. The auger should now be up on the wheels.
(If assembling a T832 skip to Step 15)
Fig. 11.1
Fig. 12.1
Fig. 11.2
Fig. 12.2
T832
T836
T842
