Configuring the DSP33 loudspeakers using a computer
29
If you choose
Meridian surround controller
the
Start
volume
,
Tilt
, and
Bass
options are controlled by the surround controller,
and will be greyed out in the Meridian Configuration program.
●
Set the
Speaker use
to
Normal
for a main or surround
speaker, or
Centre
for a centre speaker.
If the speaker is close to a wall or corner, you can optionally
apply bass equalisation to adjust the frequency response to
compensate for its position.
●
Use the appropriate
Front
or
Centre
speaker
boundary
drop-down menu to choose the appropriate option:
Option
What it means
Free
Flat frequency response.
Boundary
Speaker closer than 0.5m (2') to a wall.
Sub 1 or 2
Applies a second-order high-pass filter at
80Hz or 120Hz respectively for use with
an analogue subwoofer.
Corner
Speaker closer than 0.5m (2') to a corner.
Changing the setup options
The next stage in editing the settings is to configure the general
Setup
options.
To change the setup options
●
Click the
Setup
icon in the left-hand panel of the
Meridian
window.
The
Setup
options will be displayed:
●
In the
Controlled by
section choose the appropriate option
for the system you are using.
