DSP320.2 DSP Loudspeaker
User Guide
Installing the DSP320.2 DSP Loudspeaker
The loudspeaker is designed to be fitted in a Meridian wall
box type RF300. If necessary, refer to the
RF300 Wall Box
Installation Instructions:
https://www.meridian-audio.com/rf300-installation.pdf
Contents
Each DSP320.2 loudspeaker is supplied with the following
components:
Trim-frame.
Grille.
Fabric scrim.
3mm Allen key.
3mm hex-driver.
4 x M5 guide screws for installing into rough-in box.
2 x grille extractor keys.
1. Prepare the loudspeaker for installation
Remove the grille and scrim from the loudspeaker and put
them to one side for use later if required.
Remove the two plastic nuts and bolts used to retain the trim-
frame during shipping.
•
•
•
•
•
•
•
•
•
Remove the trim-frame.
The loudspeaker can be installed either with or without the trim-
frame according to the preferred final appearance.
Because of the weight of the loudspeaker and the method of
installation we recommend getting assistance from a second
person when installing the loudspeaker.
2. Identify the cables
If the speaker is part of a daisy-chain there will be two
SpeakerLink cables in the rough-in box. They must be
connected correctly or the system will not function.
Identify which cable is the
SpeakerLink input
cable and
which is the
SpeakerLink output
cable.
If there is only one SpeakerLink cable in the rough-in box it will
be a
SpeakerLink input
cable.
Identify the mains cable from the loudspeaker to the rough-in
box.
•
•
•
