DSP320.2 DSP Loudspeaker
User Guide
Front and back panel
Connections
The following diagram gives details of the connections on the
back of the loudspeaker:
SpeakerLink
output input
Power
Use this connection To connect to this
SpeakerLink input
The SpeakerLink output of a Meridian
Controller or another loudspeaker when
connecting in a daisy-chain.
SpeakerLink output
The SpeakerLink input of another
DSP320.2 loudspeaker when connecting
in a daisy-chain.
Use this connection To connect to this
Power
A captive power cord to connect to the
RF300 rough-in box power outlet.
Front panel
The following diagram gives details of the front panel:
Right
L+R
Left or Centre
Fuse
~50-60Hz T5.0AH
250V for 100-230V~
CAUTION:
Disconnect supply before changing fuse.
Replace with same type fuse.
ATTENTION:
Débrancher avant de remplacer le fusible.
Utiliser un fusible de rechange
du même type.
On
Off
I
O
II
Channel
selector
Status indicator
and IR receiver
Fuse
Power
switch
Item
Description
Channel selector
Specifies the loudspeaker’s role in the
system. See
Setting up the DSP320.2 DSP
Loudspeaker
, page 9.
Power switch
Controls the mains supply to the loudspeaker.
