DSP320.2 DSP Loudspeaker
User Guide
4. Set the front-panel switches
Set the channel selection switch
according to how the loudspeaker is
being used within the system.
Once the associated equipment
connected to the loudspeaker is powered
up:
Set the power switch on the front of
the loudspeaker to the
On
position.
5. Fit the scrim and grille – if
required
Lay the scrim into the back of the
grille.
Carefully locate one edge of the grille.
Lift the grille into position.
The magnets will grab the grille and hold
it in position.
•
•
•
•
•
Grille
Scrim
Magnet
positions
