vi
Quintessence User Manual
© 2007 Merging Technologies
IMPORTANT NOTICE:
Please read the following information very carefully before attempting any installation. Failure to comply
with the precise instructions may result in damage to your Merging hardware. Please read this entire
section of the manual carefully before installation.
STATIC DANGER NOTICE:
Please note that the Quintessence AV Chassis contains delicate electronic components that can be
damaged or even destroyed when exposed to static electricity. Take all necessary precautions not to
discharge static electricity when touching any of the AV Case connectors.
Product Regulatory Compliance
The Merging Pyramix, VCube and Luxor Chassis are designed and tested to meet the standards and
regulations listed in the following sections when configured with the workstation/server boards specified.
Product Safety Compliance
The Merging Chassis complies with the following safety requirements:
•
UL 1950 – CSA 950 (US/Canada).
•
EN 60 950 (European Union).
•
IEC 60 950 (International).
•
CE – Low Voltage Directive (73/23/EEC) (European Limits).
•
EMKO-TSE (74-SEC) 207/94 (Nordics).
Product EMC Compliance
The system has been tested and verified to comply with the following EMC regulations when configured
with the workstation/server boards specified
•
FCC (Class A Verification) – Radiated and Conducted Emissions (USA).
•
CISPR 22, 3rd Edition (Class A) – Radiated and Conducted Emissions (International).
•
EN45022 (Class A) – Radiated and Conducted Emissions (European Union).
•
EN45024 (Immunity) (European Union).
•
EN6100-3-2 & -3 (Power Harmonics and Fluctuation and Flicker).
•
CE – EMC Directive (89/33/EEC) (European Union).
Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2), this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Summary of Contents for Quintessence
Page 1: ......
