© 2007 Merging Technologies
Quintessence User Manual
21
Front Panel Logo Module
This module is attached to the front panel of the Quintessence AV Chassis. It extends the following internal
signals to the front panel:
•
1 x Power switch
•
1 x Reset switch
•
1 x IDE led
These three functions are displayed through the Merging logo (a) located on the chassis front panel. This
logo glows blue when the PC is in stand by (b) and shines brightly when the PC is ON (c). Each HD access
makes the smaller part of the Merging logo (reset) shine more brightly.
(a)
(b)
(c)
Internally (on the back of the logo), the module looks like this:
A triple ribbon cable is directly soldered on the pcb and provides connectivity for the motherboard power,
reset and HD activity LED headers.
Connect these three connectors as described below:
Plug the red wire side of the
POWER SW
connector onto the
+
pin of the motherboard
POWER
switch
header.
Plug the
RESET SW
connector onto the motherboard
RESET
switch header. The polarity is not important.
Plug the
HDD LED
connector onto the motherboard
HDD
header. The upper wire (when viewed as on the
above picture) must be connected on the
+
pin of the
HDD
header.
Summary of Contents for Quintessence
Page 1: ......
