AC12
AC1200 Dual Band Wireless Router
- 51 -
Appendix B: Configuring the PC
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows 7. First
make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.
1. Install TCP/IP component
1) On the Windows taskbar, click
Start
button, and then click
Control Panel
.
2) Click the
Network and Internet
, and click the
Network and Sharing Center
, then click
Change adapter settings
.
3) Right click the icon that showed below, select
Properties
on the prompt page.
4) In the prompt page that showed below, double click on the
Internet Protocol Version 4
(TCP/IPv4)
.
