AC12
AC1200 Dual Band Wireless Router
- 28 -
Network Name (SSID)
- Enter a value of up to 32 characters. The default SSID is
MERCUSYS_XXXX_5G (XXXX indicates the last unique four numbers of each router’s
MAC address).
Password -
Enter 8-63 characters using a combination of numbers, letters and symbols. The
security version is WPA2-PSK/WPA-PSK, which supports AES encryption that provides a
good level of security. If you select No Security, the filed will be left blank.
Channel -
This field determines which operating frequency will be used. The default channel
is set to
Auto
, so the router will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Mode -
Select the desired mode.
Select the desired wireless mode. It is recommended to select
11a/n/ac mixed
, and all of
802.11a, 802.11n and 802.11ac wireless clients can connect to the router.
11 a/n/ac mixed -
Select if you are using a mix of 802.11a, 802.11n and 802.11ac wireless
clients.
11 a/n mixed -
Select if you are using both 802.11a and 802.11n wireless clients.
Channel width -
Select the channel width from the drop-down list
.
The default setting is
Auto
, which can adjust the channel width for your clients automatically.
Transmit Power -
Select either High, Middle, or Low to specify the data transmit power. The
default and recommended setting is High.
Enable SSID Broadcast -
If you select the Enable SSID Broadcast checkbox, the wireless
router will broadcast its name (SSID) on the air.
