Mercusys MR90X User Manual Download Page 64

Page: 64 / 96

Chapter 4 Configure the Router in Wireless Router Mode

5. Configure LAN ports. Windows users are recommended to choose from the first two

types. Save the settings.

4. 12. System

4. 12. 1. Firmware Update

Mercusys is dedicated to improving and richening the product features, giving you a better

network experience. We will release the latest firmware at Mercusys official website

www.mercusys.com

. You can download the latest firmware file from the Support page of

our website and update the firmware to the latest version.

Note:

• Back up your router’s configurations before firmware update.
• Do NOT turn off the router during the firmware update.

1. Visit

http://mwlogin.net

, and log in with your Mercusys ID or the password you set for the

router.

2. Go to

Advanced

System

Firmware Update

3. Choose a way to update your firmware.

• Auto Update

Enable

Auto Update

and set the update time. The router will update firmware automatically

at the specified time when new version is available.

Summary of Contents for MR90X

































































































Search results

Summary of Contents for MR90X

Reviews:

Related manuals for MR90X

Brands by name

Popular brands

Mercusys MR90X, User Manual

Search results

Summary of Contents for MR90X

Reviews:

Related manuals for MR90X

Brands by name

Popular brands