32
Chapter 4 Configure the Router in Wireless Router Mode
Method 2: Using the WPS Button on the Web Screen
Click
Start
on the screen. Within two minutes, enable WPS on your personal device.
A
Device-(XX-XX-XX-XX-XX-XX)
Connected
message should appear on the screen,
indicating successful WPS connection.
Note:
XX-XX-XX-XX-XX-XX is the MAC address of your device.
Method 3: Using the WPS Button on the Router
Press the router’s WPS button. Within two minutes, enable WPS on your personal device.
4. 5. 5. Additional Settings
1. Visit
http://mwlogin.net
, and log in with your Mercusys ID or the password you set for the
router.
2. Go to
Advanced
>
Wireless
>
Additional Settings
.
3. Configure the advanced settings of your wireless network and click
Save
.
Note:
If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
