NMEA 2000 GATEWAY ASSEMBLY
90-8M0065210 MARCH 2012
Page 3 / 5
2. Connect the NMEA 2000 harness connector to the existing NMEA 2000 network.
a -
SmartCraft junction box
b -
Gateway module
c -
Existing NMEA 2000 network
d -
Chart plotter, GPS, radar, etc.
e -
Termination resistor
f -
NMEA 2000 power input harness (obtain
from local source)
Multi Engine Gateway
1. Link each engine's instrumentation together by using a wake harness or engine instrument adapter harness.
2. Connect the CAN 10 pin harness connector to the engine's instrumentation.
3. Connect the NMEA 2000 harness connector to the existing NMEA 2000 network.
Dual engine non-DTS OptiMax model
shown
a -
Starboard engine junction box
b -
Port engine junction box
c -
Wake harness or dual engine
instrument adapter
d -
Multiwake junction box or 10 pin
adapter
e -
Gateway module
f -
Existing NMEA 2000 network
g -
Chart plotter, GPS, radar, etc.
h -
Termination resistor
i -
NMEA 2000 power input harness
(obtain from local source)
Helm Gateway
1. Connect the CAN 10 pin harness connector to the engine instrumentation.
2. Connect the NMEA 2000 harness connector to the existing NMEA 2000 network.
e
120
120
e
a
b
c
50024
d
f
a
b
c
d
e
f
h
120
120
h
g
i
50246
