Section 9 - Checklists
Page 86
90-8M0099741
eng
JUNE 2015
Predelivery Inspection (PDI)
IMPORTANT: This checklist is for packages that are not equipped with Axius. For engine packages equipped with Axius, use
the Axius‑specific checklist, which appears in Section 5 of the Axius Operation Manual.
Perform these tasks before the Customer Delivery Inspection (CDI).
N/A Check/
Adjust Item
⃞
⃞
Service bulletin updates or repairs completed
⃞
Drain plug installed and drain valves closed
⃞
⃞
Seawater inlet valve open
⃞
Engine mounts tight
⃞
⃞
Engine alignment
⃞
⃞
Drive unit fasteners tightened to specifications
⃞
⃞
Power trim cylinders fasteners tight
⃞
Battery of proper rating, fully charged, secured, with protective covers in place
⃞
All electrical connections tight
⃞
Exhaust system hose clamps tight
⃞
All fuel connections tight
⃞
Correct propeller selected, installed, and tightened to specifications
⃞
Throttle, shift, and steering system fasteners tightened to specifications
⃞
⃞
Test OBDM warning system and MIL (light) operation (EC models only)
⃞
Steering operation throughout range
⃞
Throttle plates open and close completely
⃞
Crankcase oil level
⃞
⃞
Power trim oil level
⃞
⃞
Sterndrive unit oil level
⃞
⃞
Power steering fluid level
⃞
⃞
Closed cooling fluid level
⃞
⃞
Transmission fluid level
⃞
⃞
V‑engines: serpentine belt tension
⃞
⃞
Alternator belt tension (3.0L)
⃞
⃞
Power steering pump belt tension (3.0L)
⃞
⃞
SmartCraft gauges calibrated, if equipped
⃞
⃞
Warning system operation
⃞
⃞
Trim limit switch operation
