SETTINGS
eng
49
NOTE: The minimum setting can be set to 0.1 m (0.3 ft) when
the "Depth Shallow" is set to "OFF."
19.Press the "MODE" button to exit the "Depth Deep" option.
20.Press the "–" button to highlight the "Waypoint Dist" option.
NOTE: A chartplotter and GPS must be installed to monitor this
option.
21.Press the "MODE" button to enter the "Waypoint Dist"
option.
22.Press the "–" or "+" to edit the "Waypoint Dist" option. The
minimum setting is 161 m (0.1 mile) and the maximum
setting is 482 m (0.3 mile).
23.Press the "MODE" button to exit the "Waypoint Dist" option.
24.Press the "–" button to highlight the "Generator" option.
NOTE: The MercMonitor must be set to "Receive" to edit this
option. The generator must be capable of sending data on the
J1939 gateway to monitor this option.
25.Press the "MODE" button to turn the "Generator" option on
("Yes") or off ("No").
26.Press the "–" button to highlight the "Popup" option.
NOTE: HVAC System is not available at this time.
27.Press the "MODE" button to turn the "Popup" option on
("Yes") or off ("No").
28.Press the "–" button to highlight the "Exit" option. Press the
"MODE" button to exit the "Alarms" menu.
Setting the External Sensors
The external sensors menu turns a number of sensors off or on.
These include sea temperature, trim, GPS, speed, steering, and
tabs. The external sensors menu also can change how the
speed is recognized; pitot, paddle wheel, GPS, and at what
speed the transition to a different sensor occurs. The type of pitot
sensor can be changed from 689 kPa (100 psi) for most vessel
applications, to a high‑speed 1379 kPa (200 psi) sensor. A
high‑speed sensor must be installed for an accurate speed to be
displayed when the 1379 kPa (200 psi) is selected.
Summary of Contents for MercMonitor
Page 1: ...eng i 2013 Mercury Marine MercMonitor 90 8M0081596 813...
Page 2: ...ii eng...
Page 6: ...vi eng...
