Mercury MercMonitor, Manual, Page: 40 / 159

SETTINGS
34
eng
6. Press the "MODE" button to exit the "OUTER" screen data
option.
7. Use the buttons to highlight and edit the "INNER" screen
data option.
8. Highlight the "Exit" option to go to "Screen 2."
9. Press the "MODE" button to turn "Screen 2" on ("Yes") and
to edit the available data. Complete the process explained
previously for additional "Double Screen" options.
10.When finished with the "Double Screen" options, press the
"–" button to highlight the "Exit" option. Press the "MODE"
button to exit the "Double Screen" menu.
ADDITIONAL SCREENS OPTIONS
Use the "+" and "–" buttons to navigate through the additional
screen options. Use the "MODE" button to turn the options on
("Yes") or off ("No").
Optional Screens
ECO Screen
Monitors the engine sensors and looks for the best fuel
economy. Refer to Vessel Menu.
System Check
("Sys Check")
Displays the overall condition of important sensors and
battery voltage after the ignition key is turned on.
Analog RPM Displays the engine RPM with a sweeping pointer.
Analog Speed
Displays the vessel speed with a sweeping pointer. Two
different ranges are available; 0–80 or 0–120 as knots,
kilometers per hour, or miles per hour.
Trim/RPM
Displays the trim position, shows the engine cooling water
pressure (if equipped with sensor) and the engine RPM.
Peak Speed
Displays the engine RPM, vessel speed through the active
sensor, the peak vessel speed, and what the engine RPM
was at that peak vessel speed.
Water
Information
Displays the engine RPM, vessel speed through the active
sensor, coolant temperature, and water pressure.
Oil Information Displays the engine RPM, vessel speed through the active
sensor, oil temperature, and oil pressure.
Fuel Pressure
Displays the engine RPM, fuel pressure, and amount of fuel
that is currently used per hour. (Power package dependent)