manualshive.com logo in svg

Mercury MercMonitor, Manual, Page: 32 / 159

Share
Download
Mercury MercMonitor Manual Download Page 32

SETTINGS

  

26

eng

5. Press the "MODE" button to change the display units to

English ("Eng"), or metric ("Met").

MODE

35815

Exit

Speed

[DOWN] [EDIT]

Units

Display

Eng

MPH

6. Press the "–" button to highlight the "Speed" unit.
7. Press the "MODE" button to change the speed units to miles

per hour ("MPH"), kilometers per hour ("KMH"), or knots

("KN").

8. Press the "–" button to highlight the "Exit" option. Press the

"MODE" button to exit the "Units" menu.

Available Screens

Within the "Screens" menu, screens can be turned off or on. The

"Full Screens" submenu has nine full screens that can be turned

off or on. Additionally within the "Full Screens" submenu, there

are up to five "Tri Data" screens and "Double Screen" that are

user modified. Screens that are turned off or on also have a

direct relation to the various screens in the propulsion and vessel

menus, and are dependent on the power package installed that

supports the different sensors.

Summary of Contents for MercMonitor
































































































































































Reviews:

No comments