Mercury Mariner 2008 Owner'S Manual Download Page 22 | Manualshive

Page: 22 / 304

background image

•

CATEGORY:

Press OK to enter category mode. Press

/

to

scroll through the list of available SIRIUS channel Categories (Pop,
Rock, News, etc.) Press OK when the desired category appears in the
display. After a category is selected, press SEEK to search for that
specific category of channels only (i.e. ROCK). You may also select
CATEGORY ALL to seek all available SIRIUS categories and channels.
Press OK to close and return to the main menu.

•

SAVE SONG:

Press OK to save the currently playing song’s title in

the system’s memory. (If you try to save something other than a song,
CANT SAVE will appear in the display.) When the chosen song is
playing on any satellite radio channel, the system will alert you with
an audible prompt. Press OK while SONG ALERT is in the display and
the system will take you to the channel playing the desired song. You
can save up to 20 song titles. If you attempt to save more than 20
titles, the display will read REPLACE SONG? Press OK to access the
saved titles and press

/

to cycle through the saved titles. When

the song title appears in the display that you would like to replace,
press OK. SONG REPLACED will appear in the display.

•

DELETE SONG:

Press OK to delete a song from the system’s

memory. Press

/

to cycle through the saved songs. When the

song appears in the display that you would like to delete, press OK.
The song will appear in the display for confirmation. Press OK again
and the display will read SONG DELETED. If you do not want to
delete the currently listed song, press

/

to select either

RETURN or CANCEL.

Note:

If there are no songs presently saved, the display will read NO

SONGS.

•

DELETE ALL SONGS:

Press OK to delete all song’s from the

system’s memory. The display will read ARE YOU SURE ? Press OK to
confirm deletion of all saved songs and the display will read ALL
DELETED.

Note:

If there are no songs presently saved, the display will read NO

SONGS.

•

ENABLE ALERTS / DISABLE ALERTS:

Press OK to enable/disable

the satellite alert status which alerts you when your selected songs are
playing on a satellite radio channel. (The system default is disabled.)
SONG ALERTS ENABLED/DISABLED will appear in the display. The
menu listing will display the opposite state. For example, if you have
chosen to enable the song alerts, the menu listing will read DISABLE
as the alerts are currently on, so your other option is to turn them off.

2008 Mariner

(mrn)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

22

«
...
20
21
22
23
24
...
»

Summary of Contents for Mariner 2008

















































































































































































































































































































Reviews:

No comments

Related manuals for Mariner 2008

Brand: OEM Tools Pages: 4

Brand: Camcar Pages: 2

WrapAround Windjammer

Brand: Bestop Pages: 7

Brand: EEZ RV Pages: 31

2007 MazdaSpeed6

Brand: Mazda Pages: 12

Brand: ideus Pages: 159

1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P

Brand: Havis-Shields Pages: 1

2010 MX-5 Miata

Brand: Mazda Pages: 8

RAV-4 2015 Series

Brand: Toyota Pages: 50

2000 9-5 2.3 Turbo Ecopower

Brand: Saab Pages: 256

Brand: TracRac Pages: 8

Brand: Butts of Bawtry Pages: 2

LineCast Auto FM

Brand: Belkin Pages: 15

Brand: Rover Pages: 285

Brand: Xpresskit Pages: 12

Brand: Cadillac Pages: 48

Sportsman 40-0125

Brand: Westin Pages: 2

Brand: Kia Pages: 673

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands