manualshive.com logo in svg

Mercury Mariner 2008, Owner'S Manual

The Mercury Mariner 2008 Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions, maintenance tips, and troubleshooting solutions to ensure optimal performance for your Mercury Mariner 2008. Take advantage of this valuable resource to enhance your driving experience.

Share
Download
background image

1 (First)

•

Provides maximum engine braking.

•

Allows upshifts by moving gearshift lever.

•

Will not downshift into 1 (First) at high speeds; allows for 1 (First)
when vehicle reaches slower speeds.

When parking, do not use the gearshift in place of the parking
brake. Always set the parking brake fully and make sure that the

gearshift is securely latched in P (Park). Turn off the ignition
whenever you leave your vehicle. Never leave your vehicle unattended
while it is running. If you do not take these precautions, your vehicle
may move unexpectedly and injure someone.

Forced downshifts

•

Allowed in D (Overdrive) or Drive.

•

Depress the accelerator to the floor.

•

Allows transmission to select an appropriate gear.

If your vehicle gets stuck in mud or snow

If your vehicle gets stuck in mud or snow, it may be rocked out by
shifting between forward and reverse gears, stopping between shifts in a
steady pattern. Press lightly on the accelerator in each gear.

Do not rock the vehicle if the engine is not at normal operating
temperature or damage to the transmission may occur.
Do not rock the vehicle for more than a minute or damage to the
transmission and tires may occur, or the engine may overheat.

REVERSE SENSING SYSTEM (IF EQUIPPED)

The Reverse Sensing System (RSS) sounds a tone to warn the driver of
obstacles near the rear bumper when R (Reverse) is selected and the
vehicle is moving at speeds less than 3 mph (5 km/h). The system is not
effective at speeds above 3 mph (5 km/h) and may not detect certain
angular or moving objects.

To help avoid personal injury, please read and understand the
limitations of the reverse sensing system as contained in this

section. Reverse sensing is only an aid for some (generally large and
fixed) objects when moving in reverse on a flat surface at “parking
speeds”. Inclement weather may also affect the function of the RSS;
this may include reduced performance or a false activation.

2008 Mariner

(mrn)

Owners Guide (post-2002-fmt)
USA

(fus)

Driving

199

Summary of Contents for Mariner 2008

















































































































































































































































































































Reviews:

No comments

Related manuals for Mariner 2008

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
Oldsmobile 2000 Oldsmobile Intrigue Owner'S Manual preview
2000 Oldsmobile Intrigue
Brand: Oldsmobile Pages: 348
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
AutoLoc SB3PR Series User Manual And Installation Manual preview
SB3PR Series
Brand: AutoLoc Pages: 6
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Toyota Avalon 2001 Operating Manual preview
Avalon 2001
Brand: Toyota Pages: 295
Gacell SLH 27C User Manual preview
SLH 27C
Brand: Gacell Pages: 25
MiX Telematics FM 3617i Installation Manual preview
FM 3617i
Brand: MiX Telematics Pages: 39
Skoda 2015 Superb Owner'S Manual preview
2015 Superb
Brand: Skoda Pages: 276
Adaptiv Mini CAM-MB6-AD User Manual preview
CAM-MB6-AD
Brand: Adaptiv Mini Pages: 4
Thule Follow me RAPID INTRACKER Fitting Instructions Manual preview
Follow me RAPID INTRACKER
Brand: Thule Pages: 8

Brands by name

Popular brands

Load more brands