41
Chapter 4: Software & Applications
Chapter 4 Software & Applications
Introduction
This chapter describes the contents of the support CD-ROM that comes
with the motherboard package.
The support CD-ROM contains all useful software, necessary drivers and
utility programs to properly run our products. More program information
is available in a README file, located in the same directory as the
software.
To run the support CD, simply insert the CD into your CD-ROM drive.
An Auto Setup screen automatically pops out, and then you can go on the
auto-installing or manual installation depending on your operating system.
If your operating system is Windows 2000/XP, it will automatically install
all the drivers and utilities for your motherboard; if Windows NT or
manual installation, please follow the instructions described as the
Installing under Windows NT or Manual Installation section.
Installing Support Software
1
Insert the support CD-ROM disc in the CD-ROM drive.
2
When you insert the CD-ROM disc in the system CD-ROM
drive, the CD automatically displays an Auto Setup screen.
3
The screen displays three buttons of
Setup
,
Browse CD
and
Exit
on the right side, and three others
Setup
,
Application
and
ReadMe
at the bottom. Please see the following illustration.
The
Setup
button runs the software auto-installing program as explained
in next section.
Summary of Contents for KN6100M
Page 47: ...44 Motherboard User s Guide...
