Mercury KN6100M, User Manual

Page: 34 / 47

31
Chapter 3: BIOS Setup Utility
IDE DMA transfer access
This item allows you to enable the transfer access of the IDE DMA then
burst onto the PCI bus and nonburstable transactions do not.
Serial-ATA Controller
This item allows you to enable or disable the onboard SATA controller.
IDE Prefetch Mode
The onboard IDE drive interface supports IDE prefetching, for faster drive
access. If you install a primary and secondary add-in IDE interface, set this
field to Disabled if the interface does not support prefetching.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode, select En-
abled for automatic detection of the optimal number of block read/write per
sector the drive can support.
RAID Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Press <Esc> to return to the Integrated Peripherals page.
RAID Enable
This item allows you to enable or disable the onboard RAID function of
RAID function of RAID supporting devices.
Press <Esc> to return to the Integrated Peripherals page.
•
SATA 1/2 Primary/Secondary RAID (Disabled):
These four
items enable or disable the SATA 1/2 Primary/Secondary RAID.
Phonex-AwardBIOS CMOS Setup Utility
RAID Configuration
Help Item
Menu Level
RAID Enable [Disabled]
SATA 1 Primary RAID Disabled
SATA 1 Secondary RAID Disabled
SATA 2 Primary RAID Disabled
SATA 2 Secondary RAID Disabled
x
x
x
x
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults