35
Chapter 3: BIOS Setup Utility
ware power down. If the item is set to Delay 4 Sec. then you have to hold the
power button down for four seconds to cause a software power down.
HPET Support
This item enables or disables HPET support.
Resume by PCI PME
This system can be turned off with a software command. If you enable
this item, the system can automatically resume if there is an incoming call
on the PCI Modem card or PCI LAN card. You must use an ATX power
supply inorder to use this feature. Use this item to do wake-up action if
inserting the PCI card.
Resume by WOM/Ring
An input signal on the serial Ring indicator (RI) line (in other words, and
incoming call on the modem)/LAN awakens the system from a soft off
state.
Resume By USB (S3)
This item allows users to enable or disable the USB device Walk-up from S3
mode.
Resume By PS2 MS/KB (S3)
These items enable or disable you to allow mouse or keyboard activity to
awaken the system from power saving mode.
Power On By Button
This item enables or diables you to use only the power button to power on
the system.
Resume by PCI-E PME
This system can be turned off with a software command. If you enable
this item, the system can automatically resume if there is an incoming call
on the PCI Express card. You must use an ATX power supply inorder to
use this feature. Use this item to do wake-up action if inserting the PCI
Express card.
Power-On by Alarm
This item allows users to enable or disable the alarm to wake up the system.
If set to Enabled, users can specify the specific day of month and the exact
time to power up the system.
Hot Key Power ON
Use this item to allocate the hot key to wake up the system.
Power On After Power Fail
This item enables your computer to automatically restart or return to its last
operating status.
Press <Esc> to return to the main menu setting page.
Summary of Contents for KN6100M
Page 47: ...44 Motherboard User s Guide...
