Chapter 3 Device Administration
Broadband Router could be configured via Web browser,
telnet, and console terminal. Administrator can choose either
one of three methods to perform device administration.
No matter which method to use, this administration only
allows one login session at a moment. This is due to the
consideration of system database consistency. If there is any
other one intending to login, none could succeed to login at
that time. Broadband Router will pop-up an alert message.
The following description also assumes Broadband Router is
on factory default condition.
3.1 Web Based Configuration
Open the web browser and type http://192.168.8.1 in the
browser
address box. This IP address is Broadband
Router
LAN interface address.
One moment later, the main page is shown as below.
17
