2. Turn the steering on the outboard so that the drain hole is facing
downward. Remove the drain plug and drain the engine oil into an
appropriate container. Lubricate the seal on the drain plug with oil and
install.
a -
Drain plug
CHANGING OIL FILTER
1. Place a rag or towel below the oil filter to absorb any spilled oil.
2. Unscrew the old filter by turning the filter to the left.
9735
3. Clean the mounting base. Apply a film of clean oil to the filter gasket. Do
not use grease. Screw the new filter on until the gasket contacts the base,
then tighten 3/4 to 1 turn.
OIL FILLING
1. Remove the oil fill cap and add oil to the proper operating level.
a
24854
MAINTENANCE
70
eng