background image

 

 

http://www.TYAN.com 

 

 

 

Thunder K8SR 

 

S2881 

Revision 1.01

 

 

 

Copyright © TYAN Computer Corporation, 2001-2003. All rights reserved. No 
part of this manual may be reproduced or translated without prior written 
consent from TYAN Computer Corp. 
 
 
All registered and unregistered trademarks and company names contained in 
this manual are property of their respective owners including, but not limited to 
the following. 
 
TYAN, Thunder K8SR are trademarks of TYAN Computer Corporation. 
AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. 
AMI, AMIBIOS8 are trademarks of American Megatrends Inc. 
Phoenix, PhoenixBIOS are trademarks of Phoenix Technologies Ltd. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
SuSE,is a trademark of SuSE AG. 
Linux is a trademark of Linus Torvalds 
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. 
Winbond is a trademark of Winbond Electronics Corporation. 
Broadcom

®

 is a trademark of Broadcom Corporation and/or its subsidiaries  

ATI and Rage XL are trademarks of ATI Corporation 
Adaptec is a trademark of Adaptec Inc. 
Silicon Image, SATALink are trademarks of Silicon Image 
 
 
 
 
Information contained in this document is furnished by TYAN Computer 
Corporation and has been reviewed for accuracy and reliability prior to 
printing. TYAN assumes no liability whatsoever, and disclaims any express or 
implied warranty, relating to sale and/or use of TYAN products including 
liability or warranties relating to fitness for a particular purpose or 
merchantability. TYAN retains the right to make changes to product 
descriptions and/or specifications at any time, without notice. In no event will 
TYAN be held liable for any direct or indirect, incidental or consequential 
damage, loss of use, loss of data or other malady resulting from errors or 
inaccuracies of information contained in this document. 

Summary of Contents for S2881

































































Reviews: