manualshive.com logo in svg

Mercury 2002 Villager, Owner'S Manual

The Mercury 2002 Villager Owner's Manual is essential for any Villager owner. This comprehensive manual provides detailed instructions, maintenance tips, and troubleshooting techniques for optimal performance. Download this manual for free from our website, ensuring that you have all the necessary information to keep your Villager running smoothly.

Share
Download
background image

SERVICE RECOMMENDATIONS

To help you service your vehicle:

•

We highlight do-it-yourself items in the engine compartment for easy
location.

•

We provide a scheduled maintenance guide which makes tracking
routine service easy.

If your vehicle requires professional service, your dealership can provide
the necessary parts and service. Check your

Warranty Guide

to find out

which parts and services are covered.

Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications. Motorcraft parts are designed and built to
provide the best performance in your vehicle.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

Be especially careful when inspecting or servicing your vehicle.

•

Do not work on a hot engine.

•

When the engine is running, make sure that loose clothing, jewelry or
long hair does not get caught up in moving parts.

•

Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.

•

Keep all lit cigarettes, open flames and other lit material away from
the battery and all fuel related parts.

If you disconnect the battery, the engine must “relearn” its idle
conditions before your vehicle will drive properly, as explained in the

Battery

section of this chapter.

Working with the engine off

1. Set the parking brake and ensure the gearshift is securely latched in P
(Park).

2. Turn off the engine and remove the key.

3. Block the wheels to prevent the vehicle from moving unexpectedly.

Working with the engine on

1. Set the parking brake and ensure the gearshift is securely latched in P
(Park).

2. Block the wheels to prevent the vehicle from moving unexpectedly.

Note:

Do not start your engine with the air cleaner removed and do not

remove it while the engine is running.

Maintenance and Specifications

209

Summary of Contents for 2002 Villager

































































































































































































































































Reviews:

No comments

Related manuals for 2002 Villager

Hama Pico Operating Instructions preview
Pico
Brand: Hama Pages: 2
GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
Fab Fours BLACK STEEL S2560 Installation Instructions Manual preview
BLACK STEEL S2560
Brand: Fab Fours Pages: 9
Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Buick 2005 Terraza Owner'S Manual preview
2005 Terraza
Brand: Buick Pages: 428
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Dometic PERFECTVIEW CAM80AHD Installation And Operating Manual preview
PERFECTVIEW CAM80AHD
Brand: Dometic Pages: 196
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne... Installation Instructions preview
LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne...
Brand: Dakota Digital Pages: 3
SAN HIMA SGBR015 Installation Instructions Manual preview
SGBR015
Brand: SAN HIMA Pages: 10
Havis-Shields 1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P Datasheet preview
1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P
Brand: Havis-Shields Pages: 1
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Brand: Waeco Pages: 120
FALCON RIDGE CF-UFORCE-DRW01 Instructions For Installation And Care preview
CF-UFORCE-DRW01
Brand: FALCON RIDGE Pages: 6
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Brand: Hudson Pages: 77

Brands by name

Popular brands

Load more brands