manualshive.com logo in svg

Mercury 2002 Villager, Owner'S Manual

The Mercury 2002 Villager Owner's Manual is essential for any Villager owner. This comprehensive manual provides detailed instructions, maintenance tips, and troubleshooting techniques for optimal performance. Download this manual for free from our website, ensuring that you have all the necessary information to keep your Villager running smoothly.

Share
Download
background image

Trailer Tow Prep Package (if equipped)

The trailer tow prep package on your vehicle (if equipped) includes:

•

Heavy duty battery

•

Conventional size spare tire

•

Trailer tow module and jumper harness

Using the jumper harness (if equipped)

•

Remove the connector cap from the vehicle harness located behind
the rear bumper. Store the connector cap in the glove box for
reinstallation.

•

Connect the tow harness to the vehicle harness located behind the
rear bumper.

•

Connect the tow harness connector (SAE J1239) to your trailer.

•

Confirm the proper vehicle and trailer stop/turn lamp operation.

Preparing to tow

Use the proper equipment for towing a trailer, and make sure it is
properly attached to your vehicle. See your dealer or a reliable trailer
dealer if you require assistance.

Hitches

For towing trailers up to 907 kg (2 000 lb), use a weight carrying hitch
and ball which uniformly distributes the trailer tongue load through the
underbody structure. For towing trailers up to 1 588 kg (3 500 lb) use a
frame-mounted weight distributing hitch which transfers a portion of the
trailer tongue load to the front axle system.

Do not install a single or multi-clamp type bumper hitch, or a hitch
which attaches to the axle. Follow the towing instructions of a reputable
rental agency.

Whenever a trailer hitch and hardware are removed, make sure all
mounting holes in the underbody are properly sealed to prevent noxious
gases or water from entering.

Safety chains

Always connect the trailer’s safety chains to the frame or hook retainers
of the vehicle hitch. To connect the trailer’s safety chains, cross the
chains under the trailer tongue and allow slack for turning corners.

If you use a rental trailer, follow the instructions that the rental agency
gives to you.

Driving

170

Summary of Contents for 2002 Villager

































































































































































































































































Reviews:

No comments

Related manuals for 2002 Villager

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
ABL eMH1 WALLBOX Manual preview
eMH1 WALLBOX
Brand: ABL Pages: 176
ABL eMH1 WALLBOX Installation Manual preview
eMH1 WALLBOX
Brand: ABL Pages: 94
Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
Cadillac SRX 2012 Instructions preview
SRX 2012
Brand: Cadillac Pages: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Brand: Cadillac Pages: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Brand: Cadillac Pages: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Brand: Cadillac Pages: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Brand: Cadillac Pages: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 602
Cadillac ESCALADE ESV 2004 Owner'S Manual preview
ESCALADE ESV 2004
Brand: Cadillac Pages: 20
Cadillac ESCALADE EXT 2005 Owner'S Manual preview
ESCALADE EXT 2005
Brand: Cadillac Pages: 460
Cadillac CT6 SUPER CRUISE 2018 Convenience/Personalization Manual preview
CT6 SUPER CRUISE 2018
Brand: Cadillac Pages: 8
Cadillac XT6 2023 Manual preview
XT6 2023
Brand: Cadillac Pages: 20
Cadillac LYRIQ 2023 Owner'S Manual preview
LYRIQ 2023
Brand: Cadillac Pages: 337

Brands by name

Popular brands

Load more brands